Page 13 of 24
Re: 1980 Caddy project - now with vroooms
Posted: Mar Sun 11, 2012 12:15 pm
by Darkside
So does anybody have an extra fuel pump. The Mk2 jetta needs one

also Mikey did you have an extra set of wheels? just curious. thanks
Re: 1980 Caddy project - now with vroooms
Posted: Mar Mon 19, 2012 10:46 am
by Mikewire
Sorry, no extra wheels right now. I have some 13" that came with it, but I may run them when I find the right tire.
I did get the wheels from Aeron, I think they look good. I ended up having to get wheel bolts from the junkyard because the stud/lug combo for the other wheels didn't work with these OEM wheels.
Some more progress, now that I have it running. Got it up in the air on ramps and was able to clear out more of the vines that wrapped all around the, well, everything.
This hose was collapsing, and was squealing and causing cold idle issues so I found a chunk of hose and remade the piece. Worked great.
After that, I pulled the seats and cleaned everything up with some simple green and Meguiers #40 rubber/vinyl cleaner and conditioner. I also vac'd the interior, cleaned the seat sliders and tracks, and found one slider that wasn't attached to the drivers seat, so no more rocking around.
In the box of stuff I got from the PO I found the rear license plate lights, so I put them back on. I also got all new bulbs for all four corners so all the lights now work, except for one rear left circuit that I need to investigate...as it gets NO 12v at all, but only the brake/tail socket
Cleaned up the motor just a bit more and added some more coolant/water. It's starting to shape up now.
Also got new SS screws for the lights and sidemarkers and got those on the caddy.
Re: 1980 Caddy project - now with vroooms
Posted: Mar Mon 19, 2012 10:57 am
by Darkside
It is starting to take shape. Looking good Mikey

Re: 1980 Caddy project - now with vroooms
Posted: Mar Mon 19, 2012 11:13 am
by Ramrod
Looks good Mikey. It's so much fun to recondition an interior because it's such a huge difference. I'm feeling a strange urge to start calling it Charlie Babbit. (10 scene pts for anyone who can name the reference.)
Re: 1980 Caddy project - now with vroooms
Posted: Mar Mon 19, 2012 11:31 am
by Mikewire
Haha, well it made me feel pretty idiotic for a while that's for sure so the name would fit. Stupid check valve!
Pretty soon here, when I'm feeling rich I'll maybe order up some Raceland coils and drop plates from
http://oldskoolvw.com/ and see how far I can dump it on those wheels (not far lol).
Re: 1980 Caddy project - now with vroooms
Posted: Mar Mon 19, 2012 5:01 pm
by MT-Getto
Re: 1980 Caddy project - now with vroooms
Posted: Mar Fri 30, 2012 2:23 pm
by Mikewire
Got a bumper from an 1980 donor thanks to Randy in Worden

Looking for bumper clips and I can get the front end together.
Anyone have a rear bumper they want to sell?
Re: 1980 Caddy project - now with vroooms
Posted: May Thu 17, 2012 12:08 pm
by Mikewire
1980 Caddy project - now with vroooms
Posted: May Thu 17, 2012 1:23 pm
by YASHA7FOLD
Looking good. Mk1 gtg soon
Sent from my iPhone using Tapatalk
1980 Caddy project - now with vroooms
Posted: May Thu 17, 2012 1:48 pm
by MT-Getto
Bling!