Big Sky Euro

we run alot in lewistown, and there isnt any german engineering there, id love to run the rabbit there this year we should plan on a couple in lewistown. well have our camaro there too, should be running MUCH better this year if timing is right, we may run it in helena and a few in anaconda as well!

yeah we will deff have to make a weekend there for sure. id like to see how it runs on the longer track. i love to see the comaro run too. hopefully you dont get all those little problems goin on again. that would be bad news. ill try and make it to anaconda as well. you gunna make YNP this year if they still have it?

oh well still have YNP and well have at least two cars there vws this time. wait! 3 vw's. got any pics of the raceday last year? would love to see a wheels up pic of that.

the camaro's problems should be over, we had the heads gone through, and the machinist said the valves were seating like garbage, the dominator on it was 350 CFM too big, needed a 750-780CFM so we put a 750cfm Holley Race 4150 on it with a new Weiand high rise air-gap manifold took out the electronic advance garbage. Last year it was pulling the wheels off about 4 inches, then falling on its face instantly and almost dying, and still going through the traps at 12.8 @110MPH hoping to see mid- low 11's this year.

haha well heck you gotta have the vws in force next year at ynp! my buddy tony has a video or 2 of the races im not sure if you can see the wheels up though ill try and get the videos from him tonight. damn 350cfm to big!!! should run a hell of a lot better with a properly sized carb. 12.8 is flat cooking! im looking for high 11s so hopefully we will both be seeing times we want.

Alright kory i dug through me camera and found the pictures from last year!


So this is my truck and the trailer that we took the beetle down to Helena in. When we first showed up to Helena we had to drive through a sign up station and pay to enter the car in. While Kory was filling out all of his paper work the guy asked me what we had in the trailer so I took the curtisty of saying we had a big block chevelle in the trailer that was tubbed with slicks, And then kory said we have a VW bug and I think the guy did everything he could to not laugh haha


Kory waiting for his run in the lanes


Heres my poor photography I just missed the wheelie

View My Video
Korys second race of the day racin a 90s Z28 camaro. The Camaro gave everything it had to just barely win by a fender length!

nice!

my main bearing with groove machined in the center for better oil control

chromoly i beam rods with arp bolts and balanced ends. Manton 3/8 chromoly pushrods.

.058 wall thickness. made for some hardcore spring pressure and high rpm!

turbo grind cam (LBC 4 from lowbugget.com) and empi chromoly 1.25 rockers

empi forged 4140 82mm stroke crank with dual oiling holes on journals for better oiling and removable cleaning plugs

8 doweld. we dont want flywheel shimmy!

cb performance magnaspark distributor and coil. (currently in my 2027)

cperformance valve covers. ill be getting a new pair of these for thr turbo motor

Right on. Looks like one hell of a setup!

cant wait to see this thing run....love watching old bugs pull wheelies

i cant wait either this car is all i can think of all day haha. my turbo comes in on friday and hopefully i can get my taxed filed to get some cash back for some pistons and heads.