Big Sky Euro

What brand did you order for coilovers?

dont think you can get coilovers for these, you have to get sleeves collars springs etc, and bust out the grinder! i heard of a company that makes a kit, but the price is so outragous i cant think of anyone whod buy it.

Yeah that's what I was thinking when he said coilovers. The only company I know that makes "coilovers" for these cars are 2bennet and the price is just god awful. A lot of what I have seen was people running a cup kit I think is the name. Just a spring shock combo with a sleeve.

DIY coilovers. I'm rocking some A1 Racing components, QA1 springs (350F/400R), and some adjustable Koni Sports for rebound. There's no way in Hell I'd purchase the 2B Coilovers that leave you still needing more parts after shelling out nearly $2500...either way, it will be an enormous upgrade to the OE suspension setup.

I contacted Audi today to check the status on the bumper bracket I need to eliminate the sagging look...apparently they have no idea how to find one. So I asked if they had a website or contact I can look for myself. They gave me a website: http://www.shop4volkswagen.co.uk/

I was able to find the bracket I was needing but having it shipped from the UK to here cost me $29 shipped...still not a bad option. For those searching for a site to locate hard to find parts, check those guys out...

I was able to throw on the missing bracket I received from the UK this weekend and it certainly helped tighten up the gap from the front bumper to the grille. I still have a little tweaking to do but for the most part, the gap is more liveable.



I also got around to installing the 034 Big MAF kit this weekend. I threw on my 90's v6 MAF, plugged a couple unused intake hose ports, and it definitely woke up the 7A above 4k RPM...I'm glad too as it seems to have eliminated the intermittent power loss I was having throughout the power band...so far, I'm happy with the results while still not having the ECU reflashed...

love the bullet plug!

Haha, yeah I wasn't sure what to use but I had some old Ruger .480 shells lying around...turns out it was a perfect fit. On the underside, I used a battery post plastic cap which seemed to have worked well too...

you're hose clamp is crooked.

Yeah, yeah, yeah...the pains one has to deal with when incorporating OE parts with aftermarket...