Big Sky Euro

MT-Getto wrote: Have you tried whacking the wrench with a hammer while you have torque on it?

You boys been whackin' in my tool shed?

i got a rear disk conversion out of a 91' gli..... you'd need new disk and pads but everything else is opperable

here are some pics. front control arms are stripped. removed all parts i need from the RV. If some one wants the bottom end it is free come and get it.


I have 3 heads and one bottom end in my apartment, is there something wrong with that

Mrbubblehead wrote: If some one wants the bottom end it is free come and get it.

I can vouch' for that block That little 8v ripped reel good!

Getting closer to having the underside cleaned up, i seem to only be able to lay under the car for 45-60min than i'm over it. Almost have the shifter rebuilt, need a couple more parts. I managed to get all the suspension bushings out on my own, now i have to see if I can get them back in.

nice, well swing over one of these days and check out your progress./

Have the front end almost done, still needs wheel bearings and steering rack bushings. It took me 2 hours to figure out that i need to buy a bench vice to get the bushings in. All other attempts failed.

we have a little vise, if that dont work, i can take em to work and press em in for you

I went out and got one and the bushings are in. Have you done wheel bearings and hubs?

OH YES