Page 6 of 6

Re: YASHA GTI build.

Posted: Feb Thu 09, 2012 2:04 pm
by Darkside
Go Wade Go! :)

Re: YASHA GTI build.

Posted: Feb Thu 09, 2012 6:28 pm
by MT-Getto
lucky rabbit :)

Re: YASHA GTI build.

Posted: Feb Thu 09, 2012 7:29 pm
by Jd3
MAKE SURE TO GET THE CLEANER TOO!!!!!!!!!

http://www.amazon.com/POR-15-Marine-Gal ... B004LY5W2M

YASHA GTI build.

Posted: Feb Thu 09, 2012 8:20 pm
by YASHA7FOLD
That's what a gallon of a acetone will be used for.


Sent from my iPhone using Tapatalk

YASHA GTI build.

Posted: Feb Sat 18, 2012 1:08 pm
by YASHA7FOLD
On the ground.
Image


Sent from my iPhone using Tapatalk

YASHA GTI build.

Posted: Feb Sat 18, 2012 2:27 pm
by YASHA7FOLD
And now it's ON the ground.

Image


Sent from my iPhone using Tapatalk

Re: YASHA GTI build.

Posted: Feb Sun 19, 2012 4:51 pm
by Jd3
why on ground? have you por 15 'd and undercoated the bottom?

Re: YASHA GTI build.

Posted: Feb Sun 19, 2012 5:56 pm
by YASHA7FOLD
The prep and etch spry said use at 70 degrees or above and I don't have a heated garage like Mike. ;) The biggest reason is that my dad is getting back his 56 F-100 from the shop and he is going to need his storage shed back. This means that the GTi is getting evicted. :( My dad didn't think that he would get the truck back for a few more months so I thought that I would have more time to get the car put back together. But now I have no room for it and with it stripped I wouldn't want to set it outside. This means that I will have to sell it. :crybaby: At least you can finally get your stand back.

Re: YASHA GTI build.

Posted: Mar Thu 01, 2012 6:02 pm
by baw307GTI
Thats gunna be sick!