Re: Project Alaska 2K
Posted: May Mon 16, 2011 11:53 am
Yes that is in order!
Big Sky Euro
An online community for VW/Audi and other Euro Enthusiasts
http://bigskyeuro.com/forums/
2000 Jetta VR6 - Project Alaska 2K
Page 8 of 10
Re: Project Alaska 2K
Posted: May Mon 16, 2011 8:36 pm
so is MOM MA happy now lol
Re: Project Alaska 2K
Posted: May Mon 30, 2011 6:15 pm
Ahh yes John got the seal if approval.
Today I got into that knock sensor. I had to take off the filter housing and the cooler plate, but I found that it was just finger tight. Must have been one of those small things I missed when I bolted up the misc. items to the block. So, I torqued it to 20nm...guess we will see if it throws a code tomorrow.
I also un-crossed a couple of my plug wires to see if that helps with the feeling of misfires when on the highway.
Today I got into that knock sensor. I had to take off the filter housing and the cooler plate, but I found that it was just finger tight. Must have been one of those small things I missed when I bolted up the misc. items to the block. So, I torqued it to 20nm...guess we will see if it throws a code tomorrow.
I also un-crossed a couple of my plug wires to see if that helps with the feeling of misfires when on the highway.
Re: Project Alaska 2K
Posted: Jun Wed 01, 2011 8:49 am
So did that do the trick?
Re: Project Alaska 2K
Posted: Jun Wed 01, 2011 10:18 am
Yeah, been driving it for the last couple of days and so far it's pulled fine with no stuttering 
Re: Project Alaska 2K
Posted: Jun Wed 01, 2011 4:53 pm
Bonus.
Re: Project Alaska 2K
Posted: Jun Thu 16, 2011 11:08 pm
MT90 with a magnetic plug, AC relay, Super Blue and a turn stalk. All installed, brake fluid will be one of these weekends.
Re: Project Alaska 2K
Posted: Jun Fri 17, 2011 8:05 am
Common Mike... Use OEM trans fluid.
Re: Project Alaska 2K
Posted: Jun Fri 17, 2011 9:02 am
Aren't you on tranny #3? 
Re: Project Alaska 2K
Posted: Jun Fri 17, 2011 1:04 pm
OH SNAP!
Sent from my DROIDX using Tapatalk
Sent from my DROIDX using Tapatalk