Big Sky Euro

I guess its about time to quit junking up the ChitChat with my project photos and do a build thread. So here we go! I picked up an late 89 German made GLI (CE2 wiring) this last fall and dropped a valver (PL) in cause someone put a cam sprocket on backwards and mashed some valves. After painfully getting this beast running right, it starts puking oil into the air box and creating major problems. I'm over it! I remember a VR passat in Anaconda at the junk yard so I called to see if it was still there after several years and sure enough it was. With hard economic times it was had for a song and dance



What a beaut eh?

This was an automagic and only had a motor left, so I went back for the blown up one a few weeks later.



Got bent over and picked up a K-Frame from AF&T. Project started. Ive put in many hours of disassembly now and all my parts have been laid out. Now its just a life sized MK2VR puzzle



Valver out, K-frame installed (thanks Rob!) CIS garbage and wiring removed. Matt, Brandon, and Carl came over and put in some much appreciated hours this weekend. We got the hydro pedal cluster installed and a VR test fitted. Kinda a poor fit so now I will be doing some chassis mods to make room for the crank pulley. Still ahead lie wiring, plumbing and figuring out the instrument cluster.

Heres where its at now.

My buddies 2 door MK2 VR swapped. When you clearance that rail be sure to attach the sub-frame and bumper. It helps keep everything aligned correctly. I have heard of people bending the horn mount for the bumper, when doing it with out the bumper attached. Looking good. keep it up.

dope..

call me when its done ill jet down in the 7 and check it out

Thanks for the advice darkside, ill keep that in mind cause today I'm going to try to get it in for good. Maybe even start it. Yesterday I got all the wiring in. (thank you CE2 ) Today I have to get the shift box, exaust, fuel lines, and steering done before I drop her in.

Kevin, plan on near the end of the month coming over to go for a rip in the VR. Hows the 7 been for ya?

Time to eat lunch Steering in, cable shifter installed, evap installed, and plugs done. After lunch I will do heat shield for tunnel, cat /downpipe and motor accessories.

what did you do with the engein out of the black passat if you are not useing it i would like to buy it i will give you a few bills for it if it is just siting and there are no plans for it let me no

vrtpassat wrote:what did you do with the engein out of the black passat if you are not useing it i would like to buy it i will give you a few bills for it if it is just siting and there are no plans for it let me no

The motor out of the black one is the one I am using. I was told the motor out of the white one was blown up I haven't looked at it yet so I'm not sure what its deal is.

No start.......... No fuel pump with key on. Jumped pump, no start. Maybe tomorrow.

It started!!! It was the little red/yellow wire. Thanks Brandon I still have a lot to do, but I know it starts. A great feeling. Now onto the cooling system and accessories.

Nice work man, guess that drive in my MKII VR w/ the coolant loss did not scare you.

Can't wait to see it done and running, give me a hollar and we can do a MKII drive together, both cars.