Page 1 of 1

Parting out 95 mk3 golf

Posted: Mar Wed 20, 2013 12:34 pm
by benno3231
I am finally parting out my favorite rust bucket of all time.
The parts that are spoken for are:
front seats, wheels, brakes, suspension, engine, trans, motronic ecu and wiring, and anything fuel related.
The hood is the only panel that's in good shape, all others have spots of rust or are dented. I do however have a new passenger fender that is unpainted. Let me know what you need and I'll keep it around. I'm going to take a few weeks to part this one out.

Re: Parting out 95 mk3 golf

Posted: Mar Wed 20, 2013 12:37 pm
by benno3231
Image

Re: Parting out 95 mk3 golf

Posted: Mar Wed 20, 2013 3:09 pm
by SweaterVest
How is the front bumper? Is the lip removable?

Re: Parting out 95 mk3 golf

Posted: Mar Wed 20, 2013 10:09 pm
by benno3231
Front bumper is scratched but fine, and yes the lip is removable and in decent shape.

Re: Parting out 95 mk3 golf

Posted: Mar Wed 20, 2013 10:29 pm
by SweaterVest
I may be interested in picking that up.

Re: Parting out 95 mk3 golf

Posted: Mar Thu 21, 2013 1:09 am
by benno3231
PM if you want it and i'll keep it for ya :beer: I can get better pictures for you too if you want

Re: Parting out 95 mk3 golf

Posted: Mar Wed 27, 2013 6:06 pm
by benno3231
Still got parts!!

Re: Parting out 95 mk3 golf

Posted: Apr Tue 02, 2013 11:16 am
by Rennwagen1
Do you have front fenders in decent shape? Some jerk backed into the Jetta this morning. Edit, read your first post again. I am sure insurance will take care of the pass side, but how is the drivers?

Re: Parting out 95 mk3 golf

Posted: Apr Tue 02, 2013 11:40 am
by SweaterVest
I'm pretty sure I have a driver side laying around some where. It has the hole for the antenna so I couldn't use it on my gti.

Re: Parting out 95 mk3 golf

Posted: Apr Tue 02, 2013 11:52 am
by benno3231
passenger fender is brand new and drivers is in good shape but has rust on the bottom. and no hole for the antenna. I took an audi 5k fender once with this same problem and welded the bottom of the smashed fender on the new one after i cut off the rusted lower part(right at the seam where the trim goes so you couldn't see the weld and saved some body work :) ), and it worked great. PM if you're interested.