Re-Wiring a MK2 and WTB: MK2 8v Engine wiring harness!

Post by **Checkers** » Oct Tue 06, 2009 10:04 pm

I've been working on Tom's 91 GTI lately and here's the latest and most important thing we are tackling.
Looking for an entire Digi2 engine wiring harness!

Post by **4est** » Oct Wed 07, 2009 9:08 am

Digifant 2?
You need kevin. He is damn handy with Digi. and he has the workshop manunals
And i know Al Rose junk yard has a few digi jettas. In helena.

Post by **MT-Getto** » Oct Wed 07, 2009 1:11 pm

Ebay and the Whoretex................ I need that Bentley at some point too

Post by **kompressorgolf** » Oct Wed 07, 2009 2:15 pm

PICS OF THE RUST?

yeah helena has vdubs in the yards, i bet kev has a harness too.

Post by **Mrbubblehead** » Oct Wed 07, 2009 6:12 pm

I have an extra digi 1(cali) ecu and harness.

Post by **Checkers** » Oct Wed 07, 2009 8:09 pm

Mrbubblehead wrote:I have an extra digi 1(cali) ecu and harness.

How much?

Post by **kompressorgolf** » Oct Wed 07, 2009 10:54 pm

unfortunately, you would need more than the cali ECU and harness, this is DIGI 2, the fuel rail harness would also be needed. but if its the whole cali DIGI 1 harness is should work fine, Digi 2 is batch fire injectors cali digi1 is sequential fire for best gas mileage, and it can run like stink, Matts 8v once upon a time was cali1 and ran great!, you could make a harness for the injectors but would have to know which pin was each injector. a simple ecu pinout would work a treat. I say strip every wire from the firewall forward, its too hacked to guess anymore, have him reach in his pocket a little deeper, get a head gasket kit, and tune up parts, refresh this pig and put in donor harnesses. wire up a simple thermo switch fan setup or original and be done. Teach him how to do this right too, so he can follow suit later.

Post by **Checkers** » Oct Sat 10, 2009 12:40 pm

Anybody have a Digi2 car around here?

Post by **LILBLUE** » Dec Fri 11, 2009 3:05 pm

ok so i found a complete wiring hraness firewall forward. i put it in and just need to plug e verything in nake sure i got the fuse box right and conect a few wires that fell apart cuz it was so damn cold last week... just wondering if anyone was availible monday or tuesday to hopfully wrap it up?? engine love to come once some cash is scrounged up:-?

Post by **MT-Getto** » Dec Fri 11, 2009 4:04 pm

I am available in the mornings. I also know my way around a digi2 engine bay

*Big Sky Euro

Re-Wiring a MK2 and WTB: MK2 8v Engine wiring harness!

Re-Wiring a MK2 and WTB: MK2 8v Engine wiring harness!

Re: Re-Wiring a MK2 and WTB: MK2 8v Engine wiring harness!

Re: Re-Wiring a MK2 and WTB: MK2 8v Engine wiring harness!

Re: Re-Wiring a MK2 and WTB: MK2 8v Engine wiring harness!

Re: Re-Wiring a MK2 and WTB: MK2 8v Engine wiring harness!

Re: Re-Wiring a MK2 and WTB: MK2 8v Engine wiring harness!

Re: Re-Wiring a MK2 and WTB: MK2 8v Engine wiring harness!

Re: Re-Wiring a MK2 and WTB: MK2 8v Engine wiring harness!

Re: Re-Wiring a MK2 and WTB: MK2 8v Engine wiring harness!

Re: Re-Wiring a MK2 and WTB: MK2 8v Engine wiring harness!