Jd3 ninja 16v
Moderators: YASHA7FOLD, BigSkyEuro Moderators
-
Jd3
- Silky Johnson
- Posts: 654
- Joined: Apr Tue 07, 2009 8:14 pm
- Vehicles: emgay4 sixbangr
88 16v prjct bloodysteak - Location: Billings MT
Re: Jd3 ninja 16v
car going to the redneck repair shop for some rottisserie action this weekend.......
It should speak for itself
-
Rennwagen1
- The Dubfather
- Posts: 4166
- Joined: Nov Mon 06, 2006 5:21 pm
- Vehicles: 84 GTI, 97 GLX, 04 Touareg V6
- Location: ZooTown Represent!
Re: Jd3 ninja 16v
SHIT son?!?! You even smooth the pimpness on Christmas? DO WORK SON!1
Jd3 wrote:Once again I was slangin rocks and pimpin bitches. Got a degree from the streets. Listen to the song regulate by warren g. I wrote it.
Captain Pajama SharkMikeWire wrote:Vanilla Ice > Depeche Mode.
99% Awesome 100% of the time!!
1.8/2.8/3.2 OEM+
You can pay for school, but you can't buy class!
-
Jd3
- Silky Johnson
- Posts: 654
- Joined: Apr Tue 07, 2009 8:14 pm
- Vehicles: emgay4 sixbangr
88 16v prjct bloodysteak - Location: Billings MT
Re: Jd3 ninja 16v
doing work... hopefully we ll get this pile o poo poo on the road by ynp.... another tornado red shiz box. you know how that goes renty 
thanks again for the tranny
thanks again for the trannyIt should speak for itself
-
Jd3
- Silky Johnson
- Posts: 654
- Joined: Apr Tue 07, 2009 8:14 pm
- Vehicles: emgay4 sixbangr
88 16v prjct bloodysteak - Location: Billings MT
Re: Jd3 ninja 16v
here s a question for you folks out there too... I know for engine blocks i can have them acid bathed to be cleaned. for tranny s and the head can I haz them sandblasted to give them that fresh look again???
It should speak for itself
Re: Jd3 ninja 16v
Look up a product called 'Sharks Skin'. After you bead blast and clean aluminum such as the outside of the trans and head they will cover in corrosion if not sealed. The sharks skin will keep it fresh looking.
-
Jd3
- Silky Johnson
- Posts: 654
- Joined: Apr Tue 07, 2009 8:14 pm
- Vehicles: emgay4 sixbangr
88 16v prjct bloodysteak - Location: Billings MT
Re: Jd3 ninja 16v
thank you sir... would it be recommended to do that and paint. or will paint suffice???
It should speak for itself
Re: Jd3 ninja 16v
I would use a self etching primer on the metal if planning to paint the aluminum. If you wanted just raw aluminum look then the sharkhide would be all you need. I wouldn't apply paint over the sharkhide.
