Pin 4 - Launch Input - ground to trigger
> Pin 8 - Table Switching Input - ground to trigger
> Pin 24 - Hall Sensor Signal
> Pin 25 - Output 1
> Pin 27 - Output 4
> Pin 29 - Output 2
> Pin 31 - Jumpered to X7 - looks like it's for a MAF input
> Pin 36 - Spark Output
>
> This one will have hall power off of TPS power on Pin 26. It will take
> a bit of setting tinkering to get everything to work but all the
> hardware is there for the above.
the led lights are not present because they are used for additional outputs, i believe one is for a fan switch. the audi connectors and some new pins are included to make it look nice and factory.




looking for $350 obo