20VTMK2GLI

Post by **YASHA7FOLD** » Jan Sun 15, 2012 5:16 pm

That looks like one heck of a job. Good luck.

Post by **choptopvolksrod** » Jan Sun 15, 2012 5:20 pm

this swap is so cool they read it in kelvin!

Post by **MT-Getto** » Jan Mon 16, 2012 2:11 pm

Got the gearbox back together. Seems to work okay. I can shift into all gears and everything seems to spin

I can now do your 5th gear swaps.

Post by **Darkside** » Jan Mon 16, 2012 6:59 pm

Nice work!

Post by **Roadhog** » Jan Mon 16, 2012 7:03 pm

MT-Getto wrote:Got the gearbox back together. Seems to work okay. I can shift into all gears and everything seems to spin I can now do your 5th gear swaps.

If you changed gear stacks or cases you will need to set the preload on everything.

Post by **MT-Getto** » Jan Tue 17, 2012 9:55 am

Roadhog wrote:
MT-Getto wrote:Got the gearbox back together. Seems to work okay. I can shift into all gears and everything seems to spin I can now do your 5th gear swaps.
If you changed gear stacks or cases you will need to set the preload on everything.

Where did this guy come from??????

I know that is supposed to be done but I don't have the tools to do this so I'm gonna take my chances. If I grenade the gearbox I'll do it right with the next one and remember I was warned

If anyone is curious, the procedure Spencer speaks of is on pg.14 of this document.:
http://www.vwmotorsport.com/vwtech/gear ... erhaul.pdf
Good stuff on the o2a in there.

Post by **Jd3** » Jan Tue 17, 2012 1:41 pm

looks like you got it whacked.... but if you need more tranny info ( not spencers friday night dates ) this guy is the vw tranny guru of the universe. Great and informative write ups.

http://brokevw.com/

Post by **MT-Getto** » Jan Tue 17, 2012 1:47 pm

Jd3 wrote:looks like you got it whacked.... but if you need more tranny info ( not spencers friday night dates ) this guy is the vw tranny guru of the universe. Great and informative write ups.

http://brokevw.com/

Love this guy's site. Its mostly for the o2o gearboxes, but wonderful info for the average Joe.

Post by **Jd3** » Jan Tue 17, 2012 4:31 pm

thought i saw that preloading info on 02a at bottom of home page

Post by **MT-Getto** » Jan Sat 21, 2012 8:09 pm

Progress has slowed down a little. I got the gearbox mess cleaned up so I could keep moving. Holes now cut in the firewall for the master cylinder and the booster bracket is in. I also fabbed up the drive by wire pedal setup

*Big Sky Euro

20VTMK2GLI

Re: 20VTMK2GLI

Re: 20VTMK2GLI

Re: 20VTMK2GLI

Re: 20VTMK2GLI

Re: 20VTMK2GLI

Re: 20VTMK2GLI

Re: 20VTMK2GLI

Re: 20VTMK2GLI

Re: 20VTMK2GLI

Re: 20VTMK2GLI