suspension question

[vegas2017]

would suspension for a b5 a4 fit a b5 s4? the only difference i know about is from the factory the s4 suspension was a sport suspension made just for it but i would imagine that any aftermarket setup would be acceptable, as long as the drivetrain is the same( FWD, AWD). would this assumption be wrong?

[Audicted]

If I remember correctly you're right. I think I read somewhere that the passat suspension or something is the same, not to sure on that one though

[Ramrod]

Dimensions are the same, but spring rates can be different for the front due to the heavier motor. I would imagine an A4 with a 2.8 would have the same weight distribution. Just make sure to verify the spring rates, if it's set up for a 1.8T you'll be enjoying extra squishy understear.

[Mikewire]

Pretty much the same Dave. There is a vin split for the S4 in MY 2000 at 8D-Y-080001, so make sure to get control arms, etc. after that VIN or from MY 2001.

If you have specific parts that need a lookup, PM me. Or you can take a look at ECS tuning and get the x-over compatibility by comparing the B5 S4 and B5 S4 in the part lookup.

You should be able to reuse your springs on a different sport strut (hopefully?).

[Ramrod]

If you're considering lowering the car then I'd strongly recommend adjustable control arms. You'll recoupe the added cost in reduced tire wear.

[vegas2017]

its already got h&r coilovers but the fronts are blown and i was looking at the raceland coilovers. i asked them about the a4 coils and they said that they are made for all motors that came in the b5 a4.

[Ramrod]

Golden . When I was shopping for springs I found that some manufacturers had different rates, now I'm shopping for coilovers and adjustable arms to do it right.

[YASHA7FOLD]

Nice


Sent from my iPhone using Tapatalk

[vegas2017]

ya i was worried about the rates too. not sure why they dont offer them for the s4...maybe they know we'll just buy the a4 coils....