Interesting topic for a build thread

Moderators: Mikewire, Rennwagen1

Ramrod
Euro Addict!!!
Euro Addict!!!
Posts: 1148
Joined: Feb Mon 05, 2007 6:42 pm
Location: Helena, MT

Re: Interesting topic for a build thread

Post by Ramrod »

Justin, at least you got the right color combo for Bozeman. Go Bobcats!
"That Guy"
B5 Audi S4 Stg 3, '00 A6 Avant, '69 VW Squareback, '69 VW Westfalia
Image_________________________Image
User avatar
bmx_a4
In the trunk...
In the trunk...
Posts: 251
Joined: Nov Wed 18, 2009 11:41 pm
Vehicles: 00 A4 Quattro 1.8T
98 A4 2.8 - RIP
Location: Shithole, WY

Re: Interesting topic for a build thread

Post by bmx_a4 »

Ramrod wrote:Justin, at least you got the right color combo for Bozeman. Go Bobcats!
haha right?


So I decided to go through and check all my bell housing and starter bolts, because my car does not like to let those bolts stay tight. To the point that my car was down for a couple days in Bozeman because I completely lost a starter bolt.

Well, sure enough, I had one starter bolt that had backed all the way out, and two loose bell housing bolts. Apparently a $20 bottle of loctite isn't enough for 8 bolts. FML. :banghead:
2000 A4 1.8TQM -
-Single Mass Flywheel-APR Turbo Inlet Pipe-Column Mount Boost Gauge-Test Pipe-2.75" Exhaust-Eibach Springs-APR Snub Mount -
User avatar
bmx_a4
In the trunk...
In the trunk...
Posts: 251
Joined: Nov Wed 18, 2009 11:41 pm
Vehicles: 00 A4 Quattro 1.8T
98 A4 2.8 - RIP
Location: Shithole, WY

Re: Interesting topic for a build thread

Post by bmx_a4 »

Alright guys, priorities have shifted so I'm selling the Audi. I need to get the beast gone.

Friends, I am selling my car!

FOR SALE :

2000 Audi A4 Quattro 1.8T
~132,000 miles (Will rise slightly, since I drive it daily)

The Good :
- Single mass flywheel
- New clutch (Valeo unit, came as a kit with the flywheel)
- Rear main has been replaced
- Valve cover gasket replace
- Spark plugs changed
- Timing belt was done in January
- APR Turbo inlet Pipe
- APR Snub mount
- New turbo (stock unit)
- NewSouth Performance column mounted Boost/Vac gauge
(Less than 1,000 miles on all those parts)

- DDW Slim ballast 55w 8000k HID kit
- Cat-Back exhaust (Not sure on the size but it's at least 2.75")
- Eibach Sport springs (1.2-1.75" drop)

The bad :
Hood is damaged from a hit and run
Windshield is cracked (Does not obstruct view)
Wheel bearing needs replaced (Bearing is included with car)

For the right price I'll include an S4 front bumper, rebuilt cylinder head with head gasket and whatever miscellaneous other parts I have for it.

Low private party value is ~$4,400 (low value given due to body damage)
2000 A4 1.8TQM -
-Single Mass Flywheel-APR Turbo Inlet Pipe-Column Mount Boost Gauge-Test Pipe-2.75" Exhaust-Eibach Springs-APR Snub Mount -
Post Reply