1990 Audi Coupe

YouTube · Post by **Mikewire** » Dec Sun 29, 2013 12:05 am

Love it, and I now decided I need one of those.

Post by **Audicted** » Dec Mon 30, 2013 1:41 pm

One of the members I met on MG was actually doing a vr6t swap into one of these! something completely rare and nothing I would have expected. I love the white with the avus wheels, those were always eye catching for a CQ. I have some 17" BBS 5x112 that came on my 200 that I always thought would look great on a CQ but I never swapped the hubs to make 5x112.

Post by **SC_09iduA** » Jan Fri 03, 2014 5:26 pm

Yes I agree the white Coupe on the Avus wheels looks stellar. I have some 5x112 hubs that just need a shave down of about 5mm to work; I purchased these for my 90 but am for some reason happy with the OE 16s...if you're interested I'd sell them...

Is there anyone that has removed and replaced the ignition tumbler on a Coupe or 90? I've been struggling to get the damned locking arm off of the steering column. I have removed the torx T30 security bit and it seems I need one more inch to completely take the ignition off the steering column. Not a fun procedure. Anyone have any pointers?

Post by **SC_09iduA** » Jan Sat 04, 2014 1:39 pm

I got the ignition working...it was an obvious solution...I'll leave it at that :P

Post by **SC_09iduA** » Jan Sat 11, 2014 5:40 pm

For those interested, Jackson Creek Rd inside Bozo greater area, has some amazing wet/snowy conditions to bring the best out of their quad-Os....the Coupe and 90 are enjoying themselves....

Post by **MT-Getto** » Jan Sat 11, 2014 7:01 pm

SC_09iduA wrote:For those interested, Jackson Creek Rd inside Bozo greater area, has some amazing wet/snowy conditions to bring the best out of their quad-Os....the Coupe and 90 are enjoying themselves....

Just don't forget about skier traffic and familys out there

Oh.... and bring a camera.... beautiful scenery with the Bridgers as a great backdrop.

Post by **SC_09iduA** » Jan Thu 23, 2014 11:11 am

I'm in need of a center bumper support that holds the front bumper up from sagging in the middle. They attach to the bumper itself and lower radiator support. See photo below for what I'm after...

Post by **SC_09iduA** » Jan Thu 23, 2014 5:02 pm

I figured out the part I needed. I bought it from Bozeman Audi for $10...false alarm...

In case you're wondering what part I needed, below is the piece I sourced locally:

Post by **YASHA7FOLD** » Jan Thu 23, 2014 10:51 pm

Only $10. No way.

Sent from my iPhone using Tapatalk

Post by **SC_09iduA** » Jan Sat 25, 2014 4:23 pm

The coil over DIY kit was ordered on Friday so hopefully by next weekend the suspension upgrades will be completed. Stay tuned for more photos...

*Big Sky Euro

1990 Audi Coupe

Re: 1990 Audi Coupe

Re: 1990 Audi Coupe

Re: 1990 Audi Coupe

Re: 1990 Audi Coupe

Re: 1990 Audi Coupe

Re: 1990 Audi Coupe

Re: 1990 Audi Coupe

Re: 1990 Audi Coupe

Re: 1990 Audi Coupe

Re: 1990 Audi Coupe