WTB: B6 A4 parts car or junkyard parts
Posted: May Fri 18, 2012 2:48 pm
Guys, I am getting parts collected for a manual swap. I either need a cheap parts car, which would be ideal, or a junkyard where I can pull the parts from. If anyone knows of any B6 Audi A4 2.8 or 1.8T for sale (wrecked, salvage, etc.) please let me know.
Here's the parts I am needing:
Here's the parts I am needing:
- brake/clutch pedals
- clutch master cyl
- clutch slave cyl (early B5 one, they're metal)
- brake master cylinder reservoir to clutch master cylinder hose (6” of rubber fuel line would be fine)
- clutch slave cyl hard/soft line (braided stainless steel soft line, makes install easier)
- manual transmission (B6 from 1.8T or 2.8)
- manual transmission crossmember or side mounts (must match manual transmission)
- manual transmission front CV halfshafts (must match manual transmission)
- clutch fork (must match manual transmission)
- throw out bearing
- shifter assembly/control rods
- flywheel/clutch disc/pressure plate
- 43mm bearing for use as a pilot bearing (or the 3.0 pilot bearing, cut to fit)
- rear differential that matches final drive of the manual transmission you're using
- front to rear driveshaft (must match manual transmission)
- manual transmission downpipe